Electricians jobs in Lismore

Building Commission NSW (Fair Trading) issues electrical credentials under the Gas and Electricity (Consumer Safety) Act 2017. A qualified supervisor certificate lets you do and supervise electrical wiring work, while contracting to customers requires an individual, or a company or partnership, contractor licence. The main pathway is UEE30820 plus 12 months of documented experience, with a National Police Check no older than four months.

Southern Cross University, Northern NSW Local Health District, Lismore City Council and Norco Co-operative Limited are among the largest employers in Lismore. Most electricians here, though, are hired by small and mid-sized businesses rather than by the names everyone recognises — which is why so many local vacancies never reach a big job board.

The qualification is national, not local: Certificate III in Electrotechnology Electrician (UEE30820), the standard trade qualification, normally completed as a four-year Australian Apprenticeship (nominal duration 48 months full time, 72 months part time) What changes between states is the licensing or clearance — see the New South Wales requirements above.

Modern awards are national instruments, so the same award applies in Lismore as anywhere else in Australia: Electrical, Electronic and Communications Contracting Award 2020 (MA000025). Award coverage depends on the work performed rather than the job title, and pay rates change each 1 July — check the current rate for your classification with the Fair Work Ombudsman rather than relying on any figure quoted elsewhere.

The Certificate III in Electrotechnology Electrician (UEE30820) has a nominal duration of 48 months full time, or 72 months part time, so a standard electrical apprenticeship runs about four years. During that time you are employed and paid while completing on-the-job hours alongside training with a registered training organisation. Most jurisdictions then require additional documented experience or an assessment before granting a full licence.

No. UEE30820 is the qualification, but you also need an electrical worker licence issued by the regulator in your state or territory before you can legally carry out electrical work. To obtain an unrestricted electrician's licence in most jurisdictions the qualification must have been completed as an apprenticeship or through a Trades Recognition Australia pathway. Several jurisdictions add further requirements, such as 12 months of documented installation experience in NSW and Victoria.

Yes. An electrical worker licence lets you do the work, but contracting directly with customers requires a contractor licence or registration in every jurisdiction. In Queensland that is an electrical contractor licence from the Electrical Safety Office, in NSW a contractor licence from Building Commission NSW, and in Victoria registration as a Registered Electrical Contractor with Energy Safe Victoria. Western Australia, South Australia, Tasmania and the NT each have their own equivalent contractor licence.

The Licensed Electrician's Assessment (LEA) is a practical and theory assessment conducted by an assessment centre approved by Energy Safe Victoria. You must pass it before Energy Safe will issue an Electrician's licence (A Grade), and it must be completed within five years of your application date. Apprentices normally sit it after finishing their four-year training contract and Certificate III.

Not automatically in every case. Mutual recognition and Automatic Mutual Recognition arrangements let many licence holders work in other jurisdictions, and Tasmania, for example, recognises interstate electrical practitioner licences under the AMR scheme. However, each regulator sets its own conditions and some licence classes and endorsements are not covered. Contact the regulator in the state or territory you are moving to before you start work there.

Electricians working for electrical, electronic and communications contractors are generally covered by the Electrical, Electronic and Communications Contracting Award 2020 (MA000025), which applies to employers across Australia in the electrical contracting industry. The award sets out classification streams covering electrical, electronics and communications work, and includes apprentice classifications. Employers in other industries, such as manufacturing or on-site construction, may fall under a different modern award, so check coverage with the Fair Work Ombudsman.

Restricted licences cover a narrow, defined scope of electrical work rather than the full trade. Queensland issues a restricted electrical work licence, and the ACT has five restricted classes covering limited disconnection and reconnection work in electrical, mechanical, plumbing, gas fitting, refrigeration and air-conditioning contexts. They are typically held by other tradespeople, such as refrigeration mechanics or plumbers, who need to disconnect and reconnect equipment as part of their own work.

Licensing is the check most employers get wrong, because it is set by New South Wales rather than nationally. Building Commission NSW (Fair Trading) issues electrical credentials under the Gas and Electricity (Consumer Safety) Act 2017. A qualified supervisor certificate lets you do and supervise electrical wiring work, while contracting to customers requires an individual, or a company or partnership, contractor licence. The main pathway is UEE30820 plus 12 months of documented experience, with a National Police Check no older than four months. Verify the licence number against the regulator's public register rather than accepting a photo of a card, and confirm the licence class actually covers the work you are hiring for — a restricted licence looks identical to an unrestricted one on paper.

Modern awards are national, so Lismore is no different from anywhere else in Australia: Electrical, Electronic and Communications Contracting Award 2020 (MA000025). Coverage follows the work actually performed, not the job title on the contract, and classification within the award determines the minimum rate. Rates change each 1 July — check the current figure with the Fair Work Ombudsman before you make an offer, and keep a record of how you classified the role.

You are competing for the same people as Southern Cross University, Northern NSW Local Health District, Lismore City Council, who can usually offer more structured conditions than a small business can. What small employers win on is the things large ones can't move quickly on — starting date, variety of work, and a straight answer about pay. Advertising where candidates are already looking for that specific trade in Lismore, rather than on a national board where the listing is one of thousands, is the cheaper half of the problem.

Usually yes. The qualification is national — Certificate III in Electrotechnology Electrician (UEE30820), the standard trade qualification, normally completed as a four-year Australian Apprenticeship (nominal duration 48 months full time, 72 months part time) — and apprenticeships are administered through your state training authority with support from an Australian Apprenticeship Support provider. The employer obligations are the part worth understanding before you commit: a training contract, a nominated supervisor, and release for off-the-job training. Finding the right person is the separate problem, and Valont People can run that part — role design, advertising, screening and shortlisting — if you would rather not.