Painters jobs in Burnie

Consumer, Building and Occupational Services (CBOS) is Tasmania's building and occupational regulator and licenses building services providers, who must hold the qualifications, experience and competencies CBOS requires and must work only within their area of competence as set out in the Occupational Licensing (Building Services Work) Determination. Tasmania's treatment of painting could not be verified directly from the regulator's own site at the time of writing — confirm your position with CBOS before contracting.

Grange Resources (Savage River magnetite mine and Port Latta pellet plant; head office in Burnie), Elphinstone Pty Ltd (underground mining equipment manufacturing), TasPorts (Port of Burnie) and Department of Health Tasmania (North West Regional Hospital) are among the largest employers in Burnie. Most painters here, though, are hired by small and mid-sized businesses rather than by the names everyone recognises — which is why so many local vacancies never reach a big job board.

The qualification is national, not local: CPC30620 Certificate III in Painting and Decorating is the national trade qualification on training.gov.au (Release 5, BuildSkills Australia) — 29 units made up of 26 core and 3 electives, with no entry requirements, and it is suitable for an Australian Apprenticeship pathway What changes between states is the licensing or clearance — see the Tasmania requirements above.

Modern awards are national instruments, so the same award applies in Burnie as anywhere else in Australia: Building and Construction General On-site Award 2020 (MA000020). Award coverage depends on the work performed rather than the job title, and pay rates change each 1 July — check the current rate for your classification with the Fair Work Ombudsman rather than relying on any figure quoted elsewhere.

Yes, if you are contracting for painting work above the value threshold. The QBCC issues two relevant classes: 'Painting and decorating', which includes applying cement render up to 8mm, and 'Painting and decorating excluding applying cement render'. You need a technical qualification such as apprenticeship papers, an RTO qualification or recognition of prior learning, and contractors and nominee supervisors must also complete BSBESB402. Employees working for a licensed contractor are in a different position to those contracting in their own right.

Yes, in one specific circumstance. Stand-alone contracts for internal paintwork no longer require a licence in NSW, unless the paintwork forms part of other home building work. If the painting is bundled with a renovation or is external work above the monetary threshold, a contractor licence is required. The threshold is set by regulation, so confirm the current figure with NSW Fair Trading.

Yes, but not through a stand-alone painter licence. Painting and decorating is a class of domestic building work under Domestic Builder (Limited) registration, covering surface preparation, applying paint, texture coatings and wallpaper, and colour matching for homes and associated class 10 structures. Registration applies to domestic building work above a monetary threshold. Victoria's regulator became the Building and Plumbing Commission from 1 July 2025, so check the current requirements before applying.

Registration is required under the Building Services (Registration) Act 2011 to carry out painting work valued above a threshold. Individuals register as a painting practitioner and businesses as a painting contractor. You can qualify via Certificate III in Painting and Decorating plus specified business management and estimating units, a completed apprenticeship, or the equivalent of four years full-time painting experience — or via the Painters' Registration course, a practical trades test and five years of experience.

Painting and decorating is not a licensed construction occupation in the ACT, where licensing covers builders, electricians, plumbers, drainers and gasfitters, building surveyors, building assessors, gas appliance workers, works assessors and plumbing plan certifiers. Painting is also not a registered category with the NT Building Practitioners Board. In both cases, confirm your position if the painting forms part of larger building work that itself requires a licensed builder.

Surface preparation on older buildings is the highest-risk part of the job. Paint applied to Australian homes before the 1970s can contain lead, and sanding, scraping or heat-stripping it releases hazardous dust. Asbestos-containing materials such as older fibro sheeting and eaves are also common on pre-1990 buildings, and disturbing them requires appropriate controls, with removal work licensed by your state or territory WHS regulator. Check requirements with your regulator before disturbing either material.

The Building and Construction General On-site Award 2020 (MA000020) is the main modern award for on-site building and construction work, and the Fair Work Ombudsman lists painters among the tradespersons it covers alongside bricklayers, carpenters, plasterers and roof tilers. It sets minimum conditions including hours, leave and allowances. Always check the award's coverage and classification schedule for your specific role, as some painting work sits outside it.

Licensing is the check most employers get wrong, because it is set by Tasmania rather than nationally. Consumer, Building and Occupational Services (CBOS) is Tasmania's building and occupational regulator and licenses building services providers, who must hold the qualifications, experience and competencies CBOS requires and must work only within their area of competence as set out in the Occupational Licensing (Building Services Work) Determination. Tasmania's treatment of painting could not be verified directly from the regulator's own site at the time of writing — confirm your position with CBOS before contracting. Verify the licence number against the regulator's public register rather than accepting a photo of a card, and confirm the licence class actually covers the work you are hiring for — a restricted licence looks identical to an unrestricted one on paper.

Modern awards are national, so Burnie is no different from anywhere else in Australia: Building and Construction General On-site Award 2020 (MA000020). Coverage follows the work actually performed, not the job title on the contract, and classification within the award determines the minimum rate. Rates change each 1 July — check the current figure with the Fair Work Ombudsman before you make an offer, and keep a record of how you classified the role.

You are competing for the same people as Grange Resources (Savage River magnetite mine and Port Latta pellet plant; head office in Burnie), Elphinstone Pty Ltd (underground mining equipment manufacturing), TasPorts (Port of Burnie), who can usually offer more structured conditions than a small business can. What small employers win on is the things large ones can't move quickly on — starting date, variety of work, and a straight answer about pay. Advertising where candidates are already looking for that specific trade in Burnie, rather than on a national board where the listing is one of thousands, is the cheaper half of the problem.

Usually yes. The qualification is national — CPC30620 Certificate III in Painting and Decorating is the national trade qualification on training.gov.au (Release 5, BuildSkills Australia) — 29 units made up of 26 core and 3 electives, with no entry requirements, and it is suitable for an Australian Apprenticeship pathway — and apprenticeships are administered through your state training authority with support from an Australian Apprenticeship Support provider. The employer obligations are the part worth understanding before you commit: a training contract, a nominated supervisor, and release for off-the-job training. Finding the right person is the separate problem, and Valont People can run that part — role design, advertising, screening and shortlisting — if you would rather not.